Safety accessories for BRUNE humdifiers with automatic water feed

The external water monitor can be used as an additional safety precaution where there is a direct water connection (automatic feeding device) for the B 250 / B 260 / B 280 / 300 / 500 / B 600. The water monitor is fitted with an independent water valve attached between the safety pressure hose and the water tap. The water monitor´s sensor (cable length: 2m) is placed in the safety collection reservoir and shuts off the external water feed to the humidifier when it comes into contact with water. An acoustic signal also sounds and this can only be deactivated by interrupting the power supply. Installation may take place only with technical personnel! Manufacturer: BRUNELuftbefeuchtung Proklima GmbH Schwarzacher Str. 13 D-74858 Aglasterhausen 06262-5454 mail@brune.info

An additional safety feature, this collection reservoir for the B 250, B 260 and B 280 humidifier can be placed underneath the humidifier. It catches any excess water that might escape, thereby preventing damage to the installation location (e.g. parquet flooring). Highly recommended for devices with automatic water feed. In combination with the external water monitor it also serves to collect the water, thereby allowing the sensor to react quickly. Manufacturer: BRUNELuftbefeuchtung Proklima GmbH Schwarzacher Str. 13 D-74858 Aglasterhausen 06262-5454 mail@brune.info

An additional safety feature, this collection reservoir for the B 300 humidifier can be placed underneath the humidifier. It catches any excess water that might escape, thereby preventing damage to the installation location (e.g. parquet flooring). In combination with the external water monitor it also serves to collect the water, thereby allowing the sensor to react quickly. Manufacturer: BRUNELuftbefeuchtung Proklima GmbH Schwarzacher Str. 13 D-74858 Aglasterhausen 06262-5454 mail@brune.info

An additional safety collection reservoir is also available for the B 500 humidifier, which is placed underneath the humidifier. It catches any excess water that might escape, thereby preventing damage to the installation location (e.g. parquet flooring). Highly recommended for devices with automatic water feed.  In combination with the external water monitor it also serves to collect the water, thereby allowing the sensor to react quickly. Manufacturer: BRUNELuftbefeuchtung Proklima GmbH Schwarzacher Str. 13 D-74858 Aglasterhausen 06262-5454 mail@brune.info

An additional safety collection reservoir is also available for the B 600 humidifier, which is placed underneath the humidifier. It catches any excess water that might escape, thereby preventing damage to the installation location (e.g. parquet flooring). Highly recommended for devices with automatic water feed. In combination with the external water monitor it also serves to collect the water, thereby allowing the sensor to react quickly. Manufacturer: BRUNELuftbefeuchtung Proklima GmbH Schwarzacher Str. 13 D-74858 Aglasterhausen 06262-5454 mail@brune.info

The safety pressure hose prevents water escaping at the connection between humidifier and water tap. Should the hose start to leak, this is detected by protective fabric inside the hose and the water feed is automatically shut off. Manufacturer: BRUNELuftbefeuchtung Proklima GmbH Schwarzacher Str. 13 D-74858 Aglasterhausen 06262-5454 mail@brune.info

Optionally, an external water sensor can be connected to the controller of the BRUNE humidifier B 500 and B 600. The sensor is placed underneath the humidifier (recommended in combination with the safety collection reservoir) and reacts immediately if there is an uncontrolled water leak. The device stops working and you are alerted to the leak by an acoustic signal and an error message on the display. Manufacturer: BRUNELuftbefeuchtung Proklima GmbH Schwarzacher Str. 13 D-74858 Aglasterhausen 06262-5454 mail@brune.info